Skip to content
PrivBay

Construction calculator for material quantities

Estimate supplies for a rectangular surface. Enter its area or dimensions, then add the material measurements and a waste allowance.

Material
Units
Measure the surface by

Enter positive measurements and allow 0–100% extra for waste. Switching units clears measurements. Tile counts round up to whole pieces.

Calculated on this device.

How to estimate paint, tile and concrete quantities

  1. Choose Paint, Tile or Concrete under Material, then select Metric or Imperial.
  2. Select Length and width or Known area and enter the surface measurements in the units shown.
  3. Enter coverage and coats for Paint, tile dimensions for Tile, or depth for Concrete. Set the Waste allowance (%).
  4. Read the estimate and select Copy result to copy the quantity.

Estimate paint volume by area, coverage and coats

In Paint mode, this renovation calculator works as a paint calculator for walls, ceilings and facades. Enter a known surface area or length and width, then enter the single-coat coverage from your paint can label in square meters per liter ($\text{m}^2/\text{L}$) or square feet per US gallon ($\text{ft}^2/\text{gal}$). For a $12\text{ m}^2$ wall at $6\text{ m}^2/\text{L}$ coverage, two coats and a 10% waste allowance require $4.4\text{ L}$ of paint volume.

Tile quantity calculator and concrete volume calculator

Switch to Tile mode to use the tool as a tile quantity calculator: enter the length and width of one tile in centimeters or inches, and the calculator divides the surface area by the single-tile area, adds your waste allowance for cuts and breakage, and rounds up to the next whole tile. Switch to Concrete mode to use it as a concrete calculator for slabs, footings and paths: enter slab thickness in centimeters or inches to get total concrete volume in cubic meters ($\text{m}^3$) or cubic yards ($\text{yd}^3$).

Convert units and model renovation returns

Switching between Metric and Imperial clears the dimension inputs so an imperial measurement is never misread as metric, while preserving coats and waste percentage. Use the unit converter to convert feet, inches, meters or gallons separately, and the percentage calculator to check material overage. When planning a landlord remodel, open the rental property calculator to see how upfront renovation costs and operating expenses affect annual cash flow.

Frequently asked questions

How much paint do I need for two coats?

Multiply the surface area by two, divide by the coverage per liter or gallon and add the chosen waste allowance.

Why is the tile count rounded up?

You buy whole pieces. The calculator adds the waste allowance to the area-based count and rounds up to the next whole tile.

Which concrete units are used?

Metric uses square meters for area and centimeters for depth, returning cubic meters. Imperial uses square feet and inches, returning cubic yards.

What if my room is not rectangular?

Split it into rectangles, add their areas and use Known area if material settings are the same across the sections.

Does the result include package sizes or prices?

The result is a material quantity. Check the product label for package coverage and round your order to the available sizes.

Last updated November 11, 2026