Skip to content
PrivBay

Mic test: check your microphone

Run a quick sound check to test mic or check mic input in your browser: speak to see whether your microphone or headset is receiving sound and watch the live input level meter. Audio is analyzed on this device and is not played back or recorded.

Audio is measured on this device. It isn’t played back, recorded or uploaded.

Select Start test to begin.

Input level0%

Peak level: 0%

If the meter stays at zero, check the selected input and your system microphone volume.

What to do next

  • Camera test Check your webcam with a live preview, resolution details and snapshots.

How to test your mic

  1. Select Start test and allow microphone access.
  2. Speak normally and watch the input and peak meters.
  3. Stop, select a different input if available and start again to compare devices.
  4. Select Stop when finished to release the microphone.

Check that an input is working

The input meter responds to the signal from the selected microphone, while the peak records the highest displayed level during the current session. Background noise may move the meter even when no one is speaking.

This test checks signal presence, not speech quality or frequency response. Stop the test to release the microphone. Leaving the page closes the stream and the audio context.

Before your next call or recording

A quick test before a meeting can save the awkward start where nobody can hear you. Speak at your normal volume and watch the meter. If it moves, the browser is receiving sound from that input. If it moves only slightly, raise the input volume in your system settings or move closer to the microphone.

If you have several devices, such as a laptop microphone and a headset, compare them to confirm the right one is active. The meter shows that a signal is present, but it cannot judge how good you sound. Check your picture with the camera test, or capture a demo with the screen recorder. To check your speakers, play a sentence with text to speech.

To keep a clip after checking the input level, open the voice recorder.

Frequently asked questions

Why is the meter at zero?

Check browser and operating-system permissions, the selected input, hardware mute switches and system input volume. Some microphones need to be reconnected.

Will I hear my voice?

No. The microphone is connected to an analyzer only, not the audio output. This avoids feedback. The tool does not record or offer audio playback.

What does the percentage mean?

It is a visual level derived from RMS amplitude, scaled for visibility and capped at 100%. It is not a calibrated decibel or sound-pressure measurement.

Does this test record my voice?

No. The sound is measured on your device to move the meter. It is not stored, played back or uploaded.

Can I test a headset or USB microphone?

Yes, if your browser lists it. After you grant permission, stop the test, choose the device from the list and start again to compare inputs.

Last updated November 11, 2026