Skip to content
PrivBay

Dead pixel test and backlight bleed check

Cycle through five solid colors to look for fixed bright, dark or colored spots. Use black to check the edges and corners for uneven light.

Test color

Look for spots on each color and uneven bright areas on black. Use the left and right arrow keys to switch colors and Esc to exit.

Black

How to test a screen for dead pixels and backlight bleed

  1. Choose a Test color or start with Black to inspect the backlight.
  2. Select Enter fullscreen. Look across the screen on each color and use the left and right arrow keys to switch.
  3. Press Esc to exit. If fullscreen is unavailable, focus the Screen color preview and use the same keys.

Inspect a monitor for dead pixels and stuck subpixels

Drag the browser window onto the display you want to inspect and wipe away surface dust first so specks on the glass are not mistaken for defective pixels. Start this monitor test and screen test on pure white to look for a dead pixel that stays completely dark, then cycle through pure red, green and blue to spot stuck pixels where a single RGB subpixel remains permanently lit or dark.

Use the fullscreen black screen for a backlight bleed check

Select the pure black screen in a dimly lit room at your normal display brightness to check for uneven backlight bleed and IPS glow around the bezel edges and corners. View the screen straight on from your usual seating position, then shift your viewing angle slightly: IPS glow shifts as you move your head, while true backlight bleed stays fixed near the frame.

Switch solid screen colors with the keyboard or mouse

Entering fullscreen hides browser toolbars and taskbars so every edge pixel is visible. Use the left and right arrow keys to cycle through the five solid screen colors and press Esc to exit. If fullscreen is restricted by your browser, focus the in-page preview and use the same arrow keys. Verify that your arrow keys register with the keyboard test, check clicks and scrolling in the mouse test, or test your webcam feed in the camera test.

Frequently asked questions

Which colors can I use?

The test has pure black, white, red, green and blue.

Which color helps show a dead pixel?

Start with white for a dark pixel, then inspect red, green and blue for channels that stand out.

How can I look for backlight bleed?

Use black and inspect the edges and corners from your usual viewing position, preferably in a dim room.

What if fullscreen is blocked?

Use the page preview and the Test color choices. The same arrow keys work while the preview is focused.

Can I check another monitor?

Move this browser window to the other display, then enter fullscreen there.

Last updated November 11, 2026